Welcome toChangzhou No.2 Drying Equipment Factory Co., Ltd.

Changzhou No.2 Drying Equipment Factory Co., Ltd.

13801507125

Service hotline: 138-0150-7125

  • Selection
  • Technical
  • discount

金沙集团186cc成色

PLG series disc continuous dryer

  • PLG series disc continuous dryer
  • < >
    • PLG series disc continuous dryer
    • PLG series disc continuous dryer
    • PLG series disc continuous dryer
    • PLG series disc continuous dryer
    • PLG series disc continuous dryer
    PLG series disc continuous dryer
    Keywords:PLG 系列盘式连续干燥机,盘式连续干燥机,盘式干燥机
    Product Brief:The disc continuous dryer is a kind of high efficient conductive continuous drying equipment. Its unique structure and working principle determine tha...
    138-0150-7125

    S

    UMMARIZE SUMMARY

    Reliable supplier of drying equipment users

    The disc continuous dryer is a kind of high efficient conductive continuous drying equipment. Its unique structure and working principle determine that it has the characteristics of high thermal efficiency, low energy consumption, small floor area, simple configuration, convenient operation and control, and good operating environment. It is widely used in the drying operation of chemical industry, medicine, pesticide, food, feed, agricultural and sideline product processing and other industries. It is well received in various industries. Now we manufacture three types: atmospheric pressure, airtight and vacuum, four specifications of 1200, 1500, 2200 and 3000, a (carbon steel), B (uniform stainless steel in contact with materials), C (on the basis of B). Add stainless steel for steam pipeline, main shaft and bracket, stainless steel lining for barrel and top cover). Three kinds of materials, drying area of 4-180m2, a total of hundreds of models of series products, and can provide matching kinds of auxiliary equipment, can meet the needs of users for drying various materials.

    1 2 


    P

    RINCIPLE PRINCIPLE

    Reliable supplier of drying equipment users

    The wet material is continuously added to the first drying plate on the upper part of the dryer from the feeder, and the rake arm with rake leaves makes a rotary motion, so that the rake leaves continuously turn over the material. The material flows through the surface of the drying disk along the index helix, and the material on the small drying disk is transferred to the outer edge, and falls to the outer edge of the large drying disk below the outer edge. The material section moves inward on the large drying disk and falls into the next layer of small drying disk from the middle dropping mouth. The large and small drying plates are arranged alternately, and the materials can continuously flow through the whole dryer. The hollow drying plate is filled with heating medium in the form of saturated steam, hot water and heat conducting oil. The heating medium enters from one end of the drying plate and exits from the other end. The dried materials fall to the bottom layer of the shell from the drying plate of the last layer, and then are transferred by the rake leaves to the discharge port for discharge. The moisture escapes from the material and is discharged from the moisture discharge port on the top cover. The moisture of the vacuum type disc dryer is extracted from the vacuum pump port on the top cover. The dry materials discharged from the bottom layer can be packed directly. By adding fin heater, solvent recovery condenser, bag type dust remover, dry material back mixing mechanism, induced draft fan and other auxiliary machines, the drying production capacity can be improved. The paste and heat sensitive materials can be dried, the solvent can be recovered conveniently, and the pyrolysis and reaction operation can be carried out.

    P

    ARAMETER PARAMETER

    Reliable supplier of drying equipment users

    技术参数:

    Specificationsexternal diametermmheightmmDrying aream2power
    Kw
    1200/4185026083.31.1
    1200/630284.9
    1200/834486.61.5
    1200/1038688.2
    1200/1242889.9
    1500/6210030228.02.2
    1500/8344210.7
    1500/10386213.4
    1500/12428216.13.0
    1500/14470218.8
    1500/16512221.5
    2200/62900326218.53.0
    2200/8368224.6
    2200/10410230.8
    2200/12452236.94.0
    2200/14494243.1
    2200/16536249.35.5
    Specificationsexternal diametermm

    heigh

    tmm

    Drying aream2power
    Kw
    2200/181850578255.45.5
    2200/20620261.6
    2200/22662267.77.5
    2200/24704273.9
    2200/26746280.0
    3000/8380040504811
    3000/10465060
    3000/12525072
    3000/14585084
    3000/16645096
    3000/18705010813
    3000/207650120
    3000/228250132
    3000/248850144
    3000/26945015615
    3000/2810050168
    3000/3010650180

    Technical characteristics:

    (I) drying plate

    1. Design pressure: generally 0.4MPa, up to 1.6Mpa.

    2. High service pressure: generally ≤ 0.4MPa, with the height up to 1.6Mpa.

    3. Heating medium: steam, steam water, heat transfer oil and drying plate shall be heated with hot water when the temperature is 100oC, saturated water steam or superheated steam ≤ 0.4MPa when the temperature is 100oC ~ 150oC, heat transfer oil when the temperature is 150oC ~ 320oc, and electric, heat transfer oil and molten salt can be used when the temperature is > 320oc.

    (II) material transfer system

    1. Spindle speed: 1-10 rpm, electromagnetic or variable frequency stepless speed regulation.

    2. Rake arm: there are 2-8 rake arms fixed on the main shaft on each drying plate

    3. Rake blade: it is hinged on the rake arm and can keep in contact with the floating up and down of the disk surface in various forms.

    4. Rolling: for materials that are easy to agglomerate and need to be broken, rolling is added at a proper position to enhance heat transfer and drying process.

    (three) shell

    There are three types: atmospheric pressure, airtight and vacuum

    1. Atmospheric pressure type: cylinder or octagon, with integral and split structure. The main pipes at the inlet and outlet of heating medium are available inside and outside the shell.

    2. Closed type: cylindrical shell, capable of bearing 5kpa internal pressure. The main pipe at the inlet and outlet of heating medium can be inside the shell or outside the shell.

    3. Vacuum type: cylindrical shell, the design pressure is 0.1MPa, and the main pipe at the inlet and outlet of heating medium is in the shell.


    A

    PPLICATION APPLICATION

    Reliable supplier of drying equipment users

    Drying, pyrolysis, combustion, cooling, reaction, Sublimation: organic chemical products, inorganic chemical products, medicine, food, feed, fertilizer.

    F

    EATURE FEATURE

    Reliable supplier of drying equipment users

    (I) easy regulation and strong applicability

    1. By adjusting the thickness of the material layer, the rotation speed of the main shaft, the number of the rake arms, the type and size of the rake leaves, the drying process can be improved.

    2. Each layer of drying disk can be separately filled with hot medium or cold medium to heat or cool the material. The material temperature control is accurate and easy.

    3. The retention time of materials can be adjusted.

    4. The material flow direction is single, without backmixing, even drying, stable quality and no need to mix again.

    (II) simple and easy operation

    1. The operation of starting and stopping the dryer is very simple.

    2. After the feeding is stopped, the material in the dryer can be drained quickly by transferring the material scale rake leaf.

    3. Through the special large-scale inspection door mirror, the equipment can be cleaned and observed carefully.

    (III) low energy consumption

    1. The material layer is very Pu, the spindle speed is low, the power required by the material conveying system is small, and the power consumption is small.

    2. Drying by heat conduction has high thermal efficiency and low energy consumption.

    (IV) good operating environment, recyclable solvent and dust emission meet the requirements

    1. Atmospheric pressure type: due to the low air flow speed in the equipment and the high and low humidity distribution in the equipment, it is difficult for dust to float to the top of the equipment, so there is almost no dust in the tail gas discharged from the top vent.

    2. Closed type: equipped with solvent recovery device, which can easily recover the organic solvent in the wet gas. The solvent recovery device is simple and has a high recovery rate. For inflammable, explosive, toxic and oxidizable materials, nitrogen can be used as the carrier gas for closed-circuit circulation to ensure safe operation. It is especially suitable for drying inflammable, explosive and toxic materials.

    3. Vacuum type: disc dryer operated in vacuum and barking state, especially suitable for drying of heat sensitive materials.

    (V) convenient installation and small floor area

    1. The dryer leaves the factory as a whole and is transported as a whole. It only needs to be hoisted in place, so the installation and positioning are very easy.

    2. Due to the layout and vertical installation of drying plate, the drying area is large and the floor area is small.


    P

    rocess PROCESS

    Reliable supplier of drying equipment users

    工艺流程

    1 2 
    3 
    4 
    5 

     


    Changzhou No.2 Drying Equipment Factory Co., Ltd.
    138-0150-7125

    Changzhou No.2 Drying Equipment Factory Co., Ltd.

    Advisory Service
    TOP
    金沙集团186cc成色